.png)
POWERMETAL™
Varnish Effect Polished Liquid Metal
What’s a Rich Text element?
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
Static and dynamic content editing
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
How to customize formatting for each rich text
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
2k two-component varnish ready-to-use, Powermetal™ is able to confer to every kind of support made on metal, plastic, MDF and wood (carefully prepared with the specific primers) the aspect of the most natural metal alloys, like copper, brass, bronze, steel and nickel, transforming in this way the original support into a real piece of metal which lives and passes through all the transformations caused from the natural oxidation.
Varnish extremely hard and resistant against scratch, usury, thermal shocks (if correctly protected with the specific industrial cycles), it finds its main employment in the field of furniture, architecture, contract and shop fitting.
POWERMETAL™
POWERMETAL™ is not a classic metallic paint or an electrolytic plating, but a process of cold metallization able to create metal finishes completely by spraying, allowing in this way the replacement of all metal foils in the Folding process and the creation of new amorphous and complex forms never thought or created until now. POWERMETAL™ is a real paint that can be applied by spraying, by roller, by hand, or poured with the traditional equipments on a huge variety of supports. These include, but are not limited to laminate, melamine, wood, plastic, plaster, fiberglass, ceramic, concrete, foam, porcelain, glass and metal.
SUPPORT’S PREPARATION
POWERMETAL™ offers a metal composite which fastens with the substrate in a very flexible way. The strength of the bond and thus the quality of the final piece depend on the proper pre-treatment of the workpiece’s surface. Objective of the pre-treatment is to get a smooth, dry surface without any residue. Processes such as degreasing, grinding, tumbling and sandblasting can help to remove all those superficial impurities such as dust, moisture, oil or solvents. In case of porous substrates, such as wood and plaster, holes can be treated with fillers in order to achieve an optimal surface quality. Edges and corners should be smoothed in order to allow a perfect polishing of these areas, enhancing also in this way the desired decorative effect.
APPLICATION
The dried substrate has got a matt surface that shows some irregular parts and an oxide layer, which is due to the chemical reaction during the hardening process. Proceed with the pre-treatment of sanding or sandblasting. Sandblasting or sanding will remove the reactive layer and all irregular surfaces. The metal’s surface will be matt and ready for the next treatments. The composite metal obtained on the surface can be treated with different processes: additional sandblasting, sanding, polishing (high gloss or matt), semi-bright brushing, brushing with scotch brite, grinding oil, to obtain different superficial results of brightness, gloss and structure. A BRONZOX™ treatment with different solutions causes a chemical transformation of the metal surface in a few hours. The possible effects are: 1. Oxidation of bronze, brass and copper 2. Corrosion of bronze, brass, copper, nickel steel, chrome steel and iron 3. Corrosion (rust) of iron.
The condition of the surface of the final metal can be maintained for a short period of time with a special sealing. When the surface is cleaned only after the final treatment of the metal, it changes in a natural way. A less smooth surface will show the corrosion and all the reactions faster than a smoother surface.
SURFACE’S TREATMENT
The dried substrate has got a matt surface that shows some irregular parts and an oxide layer, which is due to the chemical reaction during the hardening process. Proceed with the pre-treatment of sanding or sandblasting. Sandblasting or sanding will remove the reactive layer and all irregular surfaces. The metal’s surface will be matt and ready for the next treatments. The composite metal obtained on the surface can be treated with different processes: additional sandblasting, sanding, polishing (high gloss or matt), semi-bright brushing, brushing with scotch brite, grinding oil, to obtain different superficial results of brightness, gloss and structure. A BRONZOX™ treatment with different solutions causes a chemical transformation of the metal surface in a few hours. The possible effects are: 1. Oxidation of bronze, brass and copper 2. Corrosion of bronze, brass, copper, nickel steel, chrome steel and iron 3. Corrosion (rust) of iron.
The condition of the surface of the final metal can be maintained for a short period of time with a special sealing. When the surface is cleaned only after the final treatment of the metal, it changes in a natural way. A less smooth surface will show the corrosion and all the reactions faster than a smoother surface.
